7. ADVANCED SETTING
Under do not execute the Datalogger function,
press the " SET Button " ( 3-7, Fig. 1 ) continuously at
least two seconds will enter the " Advanced Setting " mode.
then press the " SET Button " (3-7, Fig. 1 ) once a while
in sequence to select the ten main function, the lower
display will show :
dAtE......
Set clock time ( Year/Month/Date, Hour/Minute/
Second )
SP-t.......
Set sampling time ( Hour/Minute/Second )
PoFF.......
Auto power OFF management
bEEP........
Set beeper sound ON/OFF
dEC........
Set SD card Decimal character
Sd F.....
SD memory card Format
tYPE......
Select the Thermometer to Type K or Type J
AirF....
Select the Air flow unit to CMM or CFM.
ArEA....
Set the area size of Air flow measurement
t-CF.......
Select the Temp. unit to
℃
or
℉
Remark :
During execute the " Advanced Setting " function, if
press " SET Button " ( 3-7, Fig. 1 ) > 1.5 seconds will exit
the " Advanced Setting " function, the LCD will return to
normal screen.
7-1 Set clock time ( Year/Month/Date,
Hour/Minute/ Second )
When the lower display show " dAtE "
1) Use the "
▲
Button " ( 3-5, Fig. 1 ) or "
▼
Button "
( 3-6, Fig. 1 ) to adjust the value ( Setting start from
Year value ). After the desired value is set, press the
" Enter Button " ( 3-8, Fig. 1 ) once will going to
next value adjustment ( for example, first setting
20
