5 GENERAL SAFETY
Read all safety warnings and instructions. Failure to follow the warnings and
instructions below may result in electric shock, fire and / or serious injury. Keep these
safety precautions and instructions so that you can consult later. The term used
below refers to power tools powered network "power tool" (with cable) or battery
(cordless).
5.1
Workplace
Keep the work area clean and well lit. Workspaces in disorder and not lit may
result in accidents.
Do not use the device in potentially explosive environments in which they are
liquids, gases or dusts. Power tools create sparks which may ignite dust or fumes.
During the power tool, keep away children and non-professionals. Distractions,
you could lose control.
5.2
electrical safety
Always check that the data on the plate correspond to those of the electrical
network.
The plug must match the outlet. The plug can not be modified in any way. Do not
use adapters along with grounded appliances. Unmodified plugs and sockets
suitable current to reduce the risk of electric shock.
Avoid body contact with grounded surfaces such as pipes, heating systems,
ranges and refrigerators. There is a high risk of electric shock if your body is
grounded.
Protect the device from rain and moisture. The Water entering
a power tool will increase the risk of lethal electric shock.
Avoid damaging the cable. Do not use the cable to drag the machine, or to get
him to pull the plug. Keep away the cable from heat, oil, sharp edges or moving
parts of the. Damaged or entangled cords increase the risk of lethal electric shock.
If the power tool is used outdoors, use only extension cords suitable for this
purpose. The use of an extension cord suitable for outdoor use reduces the risk of
lethal electric shock.
If you can not avoid operating a power tool in a damp location, use a power
network protected by a residual current device (RCD). The use of an RCD
reduces the risk of lethal electric shock.
5.3
personal safety
Pay attention. Be very careful what you do when you are working with a power
tool. Do not use the device when you are tired or under the effects of drugs,
alcohol or drugs. An unguarded moment during use can result in serious injury.
Always wear a pair of safety glasses and wear personal protective equipment
such as dust mask, non-skid safety shoes, hard hat or ear protection, depending
on the type of use of the power tool, decreases the risk of injury.
Prevent accidental operation. Make sure the switch is on "off" position before
inserting the plug into the socket. If you carry the finger rests on the switch, or if
the device is already connected to the network in the engaged position, there can
be accidents.
Before starting the unit, remove adjusting tools or spanner. A wrench or a key left
attached to a rotating section can cause injury.
Do not lean too far when working with the unit. Finding a safe place and always
keep your balance. This way you can control the device even in unexpected
situations.
