FM Radio:
SETTING CLOCK:
Maintaining your WaveCube Aqua:
- Pull up the radio antenna to receive the signal.
- Cycle through the MENU options until you reach the radio station
option. The last station played will be the default choice.
- Use the
VOL -
/
VOL +
to move through the
channel options. You’ll see the letter P followed by a number.
This indicates the number the station has in the channel listing.
- Holding
VOL -
/
VOL +
for 3 seconds also
decrease or increase the volume.
- To perform an automatic channel scan press for 2
seconds. The scan will start and stop automatically.
- Press MENU for 3 seconds to turn LED pulse lighting on/off.
The default setting will always be the CLOCK.
To change the time:
- Move device away from other electronics using radio waves
such as cellular phones to avoid interference.
- Remove any headphones connected to the device.
- Make sure the internal antenna has been pulled up all the way.
- Plug in the Lutema RadioWave Antenna external antenna into
the Line-in jack.
If the device fails to get a radio signal, follow
these steps:
- Press for 3 seconds until the hour begins blinking.
- Use the
VOL -
/
VOL +
to decrease or increase
the hour.
- When you’ve reached the hour you want, press to move
to the minutes.
- Use the
VOL -
/
VOL +
to decrease or increase
the minutes.
- Press
- NOTE: This speaker uses the 24-hour international clock where
13 = 1pm/ 14 = 2pm/ 15=3pm/ 16=4pm/ 17=5pm/ 18=6pm/
19=7pm/ 20=8pm/ 21=9pm/ 22=10pm/ 23=11pm/ 0=midnight.
- Clean using a slightly damp cloth.
- Avoid contact with liquids.
- Avoid prolonged exposures to extreme temperatures or
humid weather.
- Make sure that the battery is fully charged before use.
