• Press the
MENU
button.
• Use
VOL - / VOL +
to scroll the Line In (headphone icon).
• Press
MENU
.
• Start your computer’s playlist. It will be redirected into the speaker.
• Hold
VOL - / VOL +
to decrease/increase the volume.
15 is the loudest setting.
• If the volume is still low, adjust the computer volume level.
• You’ll still control the playing and pausing to tracks from your computer.
• Scroll through the FM dial using
VOL - / VOL +
• Adjust the volume: hold either
VOL - / VOL +
for two
seconds to bring up the volume bar. Then use
VOL - / VOL +
to decrease/increase volume.
o
Speaker Open/close: Press on
MENU
to open the speaker. The speaker
will automatically default to close when you exit the FM radio .
o
Delete channel: Click on
MENU
to delete the current station from memory.
o
Delete All: Remove all channels from memory.
o
Auto Search: scroll through FM band looking for channels.
o
Common Band: VHF Frequency – FM Band Radio 87.5mhz to 108mhz.
The automatic default will be to Common Band.
o
Japan Band: VHF Frequency 76mhz to 90mhz
o
Exit: leave this menu without saying anything. If you can’t get out of
the FM radio, hold MENU for a few seconds. If that doesn’t work turn
the Lutema speaker using the on/off switch.
Tips for playing music:
If the device fails to get a radio signal, follow these steps:
• Move device away from other electronics using radio waves such as
cellular phones to avoid interference
• Remove any headphones connected to the device
• Plug in the Lutema RadioWave Antenna
• Power on the device and tune to a radio station.
MENU OPTION
6: Line in
Connect to your computer and use the Lutema WaveCube as
peripheral speaker. To activate this option:
You’ll use the cord with the two headphone jacks. Plug one end into the
Line In connector on the speaker and the other headphone jack into
your computer or smartphone.
