WARNING:
When hanging the fixture from higher position, please make sure you use safety cable to
attach the barndoors to the yoke of the panel.
Barndoors should always be used to secure the fixture and the application when used in this
way.
Another safety cable should be used to secure the fixture to the mounting pipe or truss.
Both safety cables must be properly dimensioned for the fixture and the application when
the fixture is operated in hanging position please ensure that the accessories are installed
correctly with top latch locked.
SAFETY PRECAUTIONS:
Do not operate the equipment before studying
the instruction manual and the accompanying
safety precautions. Make sure that Lupo
Safety Instruction is always included with
the equipment! Lupo products are intended
for professional use. Do not place or use
the equipment where it can be exposed to
moisture, extreme electromagnetic fields or in
areas with flammable gases or dust! Do not
expose the equipment to hasty temperature
changes in humid condition as could lead to
condensation water in the unit. Equipment
must only be serviced, modified or repaired by
authorized. Dealers or the factory.
CAUTION - BURN HAZARD - HOT PARTS
Do not touch hot parts with bare fingers! LED
bulbs and certain metal parts emit strong heat
when used!
Do not point lamps too close to persons.
Always use the fixtures with the front part
closed.
NOTICE - EQUIPMENT OVERHEATING RISK
Do not obstruct ventilation by placing filters,
diffusing materials, etc. over inlets and outlets
of the equipment ventilation or directly over
glass cover or LED bulbs.
FINAL DISPOSAL
Equipment contains electrical and electronic
components that could be harmful to the
environment.
Equipment may be returned to Lupo distributors
free of charge for recycling according to WEEE.
Follow local legal requirements for separate
disposal of waste, for instance WEEE directive
for electrical and electronic equipment on the
European market, when product life has ended.
MAINTENANCE AND CARE
Please do not forget that the safe operation of
lampheads also includes their maintenance
and care.
A visual inspection should be conducted before
every use and an inspection of electrical safety
should be conducted at least once every 12
months.
WARRANTY
The warranty period for Lupo products and
those marketed by Lupo is twelve months from
the date of delivery. Lupo guarantees that the
goods it supplies are well manufactured and
of good quality. The warranty guarantees the
repair of any parts that show acknowledged
defects in materials, construction or
workmanship during the warranty period. The
guarantee excludes any liability for direct or
indirect damage of any kind and for any reason,
for which Lupo will therefore not be required
to pay compensation. The customers shall
see to delivering the parts that need repair
or replacement to Lupo’s works at their own
expense and risk. The repaired or replacement
parts shall be delivered by Lupo ex-works. The
customers will be charged for materials and
labor or replacement of the product after the
expiration of the warranty period.
Thanks for having purchased
Lupo
products. All the products are made in Italy and all the efforts
have been put to keep the quality standards high. We hope this product can help you in your job and
make your life easier as a professional. We also hope you will enjoy its use and we would be happy to
receive your feedback about it.
