Lupine SL Mono, Manual

Page: 10 / 13

Capacity indicator:
After turning the lamp on, the button will show the capacity
for aprox. 2 seconds.
100 - 76% capacity = lights green
75 - 51% capacity = blinks green
50 - 26% capacity = lights red
25 - 0% capacity = blinks red (needs to be charged)
Light sensor :
If the light sensor is activated , the lamp will switch between
daytime running light and low beam automatically, depending
to the ambient light. If low beam is activated you can switch
to a dimmed low beam by pushing the button once. The light
sensor is still active. Note: The sensor controlled switch from
night- to daytime running light occurs with a delay of 16 sec.
If the light sensor is deactivated , you can manually switch
through the dim levels by pushing the button once.
1. Daytime running light, 2. dimmed low beam, 3. low beam
Operation
1. Warning , low capacity remaining.
2. Warning , very low capacity remai -
ning, charge immediately. Only daytime
running light remaining.
3. Warning , Attention: beam pattern no
longer conforms to the StVZO. In order
to be able to continue using the lamp,
confirmation via the button is required.
Button lights red:
Button blinks red:
Button blinks
red/blue:
Battery warning at the lamphead in operation:
Operation