Engli
sh
22
SL AX StVZO
23
SL AX StVZO
Lamphead informations
Capacity indicator
Audible:
To check the capacity, simply press the touch-pad once. At first an audible signal will
sound to give a quick reading in 20% steps.
Visible:
The visible indicator uses 5 red LEDs. The LEDs can operate in two different operating
states: blinking and continuous. LED meanings:
A blinking LED is indicating a 10% step and a continuously glowing LED a 20% step.
Taillight:
To run the taillight simply
press the touch pad two times
and the 5 LEDs will operate continuously.
To switch off the taillight, simply press the pad again.
Moving light:
Press the touch pad three times
to activate the moving light. To switch it off
press the button another time.
Operation Smartcore battery
5 x
= 100 %
4 x
= 80%
3 x
= 60%
2 x
= 40%
1 x
= 20%
Example:
3 LEDs
steady glow
(20 %, 40 %, 60 %)
1 LED
blinking
(80 %) = 70 % remaining capacity
Warning!
The lamp flashes several times.
Stop immediately!
The light will be switched off.
1. Battery Warning
, low capacity remaining.
High beam is activated.
Lamp lights up 1x:
Lamp lights up several times:
At the remote:
The „high beam symbol“ of
the remote lights blue
Battery warning at the lamphead in operation:
Summary of Contents for SL AX 10
Page 1: ...SL ax StVZO ...
