26 Piko R
Special functions
English
27
Piko R
Special functions
To activate diff use light or SOS (depending on the programming), keep the button of the
lamphead pressed until it lights up red once, let go immediately. The light setting is activated.
You choose and setup the diff use light or SOS further down in the programming.
The diff use light level can be activated or deactivated in the respective light program.
Example: When it‘s deactivated the default light setting would only light with 20W and 6W.
The LED indications will be reduced to a minimum. For example, there's no voltage display
after connecting the lamphead to the battery.
When the power is interrupted/disconnected and current fl ows again, the lamp lights up in
the last used light level without having to switch it on manually.
Example: If the battery is disconnected from the lamp while it‘s on and the battery is recon-
nected, it will light in the last used light level.
Activate diff use light / SOS:
Programming diff use light on/off :
Stealth:
Autostart after power interruption:
This mode includes an additional slow fl ash mode.
RVLR: (3-step RVLR)
The lamp will not start at maximum power as by default, but at the lowest stage.
The lamp may only be switched on with a quick double click. Useful for anybody who wants to
avoid that the lamp is switched accidentally in particular during transport
(e. g. in a backpack).
Resets the lamp to default setting without disconnecting the Bluetooth connection to the
remote control.
Start with lowest beam:
Doubleclick:
Bluetooth Connect:
Reset:
Connecting remote control:
Keep the lamp’s button depressed until the switch turns up green, let the button go. The
receiving mode is active for aprox. 30 seconds. During this time, press the remote control’s
green button until the remote does light up green, too. Release the button.
Connecting with app:
Start the „Light Control 2.0“ app. Choose the Piko and keep the button on the
lamphead pressed, until it lights up green as shown in the programming sheme
(p. 24), let the button go immediately.
....
Keep
button
pressed
Release button
