19
Betty TL2 Pro
Deut
sc
h
Engli
sh
Read this manual before using
Carry a spare light with you at all times, as the product can potentially fail unexpectedly at any time.
Heat development:
Our Betty TL2 Pro is not a normal flashlight. With continuous operation at maximum power, the enclo-
sure may become hot; therefore, always ensure a safe distance to flammable materials.
Caution!
When operating the lamp at maximum power, the light may be dimmed after several minutes
depending on the ambient temperature. This is normal and will reduce the lamp's temperature.
Water resistance:
All Betty TL2 Pro components are waterproof and can of course be used under extremely severe con-
ditions. The lamp complies with IP-68 protection class but is NOT a diving lamp and is NOT suitable for
use under water.
Locking mechanism:
Before removing the flashlight, check the position of the lock. Make sure the lock is open. To remove or
insert the flashlight into the docking station, you must overcome a clear pressure point.
Safety instructions:
Warning!
Avoid looking directly into the light emitted by the light or shining the light
into your own eyes or the eyes of another person. If the light accidentally shines into your
eyes, close your eyes and move your head out of the light beam. Do not use any strongly
focusing optical device to look at the light beam.
In cases where the light is used in a public or commercial setting, users should be
provided with training concerning the safety measures for laser light.
In picture:
Unlocked docking station