Function: Pair cameras to the NVR channels. Then the system can
transmit the NVR’s WIFI hotpot and password to the cameras and
the cameras can transmit the video signals back to the NVR
wirelessly.
When to Use Match Code:
a) Add new add-on cameras to the NVR.
b) Re-pair cameras to the NVR when they lose connection. Please
note that you will need to delete the connection losing channel to
make it an unoccupied channel (Regularly indicates as “No Video
Source” under “Status”) before you re-pairing the cameras.
Operation:
Step 1. Connect the camera and the NVR with network cable. Plug
the camera and NVR in power. The Ethernet port at the end of the
camera shall blink green light if there is nothing wrong.
Step 2. Wait for about 20 seconds, and then click “Refresh” on the
top right side and you shall see the camera’ information displays in
the upper box.