5
90 mm
Ø 60
The control unit,
the operating
element and the
power supply can
be appropriately
installed in a
standard switch
box (90 mm deep),
as shown.
If the power supply
is installed at a
different location, a
simple, 42 mm
deep switch box
will be sufficient.
Installation
EN
Control unit
Switch box 90mm
Power supply (to be connected
according to circuit diagram)
Attention!
Connect control unit and
operating element only
via the cable of the
control unit!
An extension of the cable
is not possible!
Cable
Metal carrier plate
(8x hook on the on the top)
Operating element snapped into
place in the frame
