E269 11.18
Description and functions
Installation
Technische Daten
Power supply
230 V AC 50 Hz
Dimensions
W x H x D
270 mm x 270 mm x variabel
Available static pressure
227 Pa
Housing for flush mounting made of UV-stable plastic and Styrofoam coating, sui-
table for outer wall installation with rear conical exhaust vent (DN 80-DN 75) and
leakage-airtight backdraft shutter.
All ventilator inserts of the Silvento series can be inserted into the flush-mounted
housing.
The housing is available in different thicknesses or can be extended to fit any exis-
ting wall thickness using Styrofoam adapter.
Versions available:
3/UP-AS10,7
Housing with rear exhaust vent and Styrofoam coating (107 mm depth), sound in-
sulation, plaster protection cap and mains supply terminal
3/UP-A17,5
Same as 3/UP-AS10,7, additionally with wall duct 9/J30 and Styrofoam adapter to
extend the above-mentioned housings by 53 mm each
Order No. 039 841
The installation of the housing is made by flush finish with the wall and ventilation
using the wall duct directly through the outer wall.
Please observe the installation manualhave the electrical connection of the fan per-
formed by a qualified professional.
Note
Products and illustrations may vary slightly. Due to continuous product develop-
ment and/or several suppliers e.g. for raw materials, colours, among other things,
may vary slightly (not for visible parts) or be shown differently in brochures.
