Technisches Infoblatt
LUNOS Lüftungstechnik GmbH für Raumluftsysteme ∙ [email protected] ∙ www.lunos.de
Surface-Mounted Housing 3/AP
E264 11.18
Pressure-volume characteristic curve
Airflow volume (m³/h)
T
o
ta
l p
re
ssu
re
d
iff
e
re
n
ce
(
P
a)
Description and functions
Installation
Technical data
Power supply
230 V AC 50 Hz
Dimensions
W x H x D
269 mm x 269 mm x 109,5 mm
Available static pressure
221 Pa
Housing for surface mounting made of UV-stable plastic, suitable for wall and cei-
ling installation with rear conical exhaust vent (DN 80 - DN 75) and leakage-airtight
backdraft shutter.
The exhaust vent is top left, however, the housing can be turned at a right angle,
so that the exhaust vent is either top right, bottom left or bottom right. The adjust-
ment of the backdraft shutter to the appropriate installation position is done by
simply changing its position.
All ventilator inserts of the Silvento series can be inserted into the surface-mounted
housing.
Order No. 039 144
Using the supplied drilling template, the holes for dowels and screws as well as the
hole for the exhaust air connection can be prepared. The housing is installed by
flush termination on the wall or ceiling and venting with the aid of the DN 80 alumi-
nium flexible pipe to the main pipe or directly through the outer wall with a wall
bushing.
The ventilation unit is insulated, the protective conductor connection is omitted.
Please observe the installation manual and have the electrical connection of the
fan performed by a qualified professional.
Hinweis
Products and illustrations may vary slightly. Due to continuous product develop-
ment and/or several suppliers e.g. for raw materials, colours, among other things,
may vary slightly (not for visible parts) or be shown differently in brochures.
