Page 3 of 4
Page 2 of 4
Installation Steps
6
Illustrations may vary upon application
3
5
4
Using the provided hardware, secure the billet grille as shown in the diagram below.
Caution: Do not over-tighten the kep nuts!
Gently push the stock grille shell back in place and replace the 10mm bolts.
Make sure everything is secure and close the hood.
2
1
Open the hood and remove the top bolts using a 10mm socket.
Gently pull the grille shell forward.
Insert the billet grille in the front, covering the stock mesh.
Front of
Vehicle
D
C
A
B