Lunar DPX-IQ, Operator'S Manual, Page: 93 / 166

DPX-IQ Operator’s Manual Total Body D-3
Figure D-2. Total body scan image
D.2 Total Body Image Analysis
The procedure that follows gives the basic steps necessary to complete a total body
analysis. Refer to section D.3 for more information.
1. Refer to section 2.4.1 to select a patient scan file for analysis.
2. At the Bone Results screen, make sure the cut positions are correct. Are changes
necessary?
• If yes, select
$
. The Auto Analysis screen is shown. Continue with step 3.
• If no, continue with step 5.
3. Select
#
. Use the options shown on the screen to change cut positions.
4. Select
!
. The Bone Results Screen is shown.
5. Use the arrow keys to highlight the region to be shown on the Analysis Results screen.
6. Select
!
. The Analysis Results screen is shown. Refer to figure D-3, which shows
the two possible graphic styles you may see. For Total Body analysis, you can choose
to display a WHO Fracture Risk graph (shown on the right) instead of the Lunar
Standard graph (shown on the left) when you are doing a Total analysis. Refer to
section 4.2.3 for an explanation of the Fracture Risk graph and for more information
about changing Printout Display Options in the General Default Settings.