Luna
BBSHD
Ludicrous V2
USER MANUAL
2021-06-30
Each profile has these parameters to tune:
● Throttle Amps
The throttle controls the phase Amps, and this slider sets the max available phase current at
the throttle. Torque output is directly proportional to phase current, so the slider is ultimately
setting the amount of torque your motor produces.
● PAS Amps
The Cadence-based Pedal Assist algorithm generates torque based on pedaling speed. This
slider sets the max phase Amps produced by PAS.
● Power
Maximum power limit. Decreasing power will mostly affect mid-high speed performance.
● RPM
Set motor RPM limit
● Throttle Response
The sharpest throttle response is achieved by reducing the ramp-up time to only 0.3
seconds. For a more smoother response, the slider can increase the ramp-up time to up to 3
seconds.
● Torque Linearity
With the slider maxed out, the Throttle angle vs Torque will be fully linear. Reducing linearity
will reduce the Torque in the initial part of the throttle, making it smoother on the low end.
● Fixed Throttle Amps
When checked, the throttle current limit will be fixed at its maximum setting, equivalent to
level 9. When not checked, throttle torque follows the display levels (1 to 9). Setting level 0
always disables both throttle and PAS.
www.lunacycle.com
11/23