~Ebony Inlaid Phoenix
~Ebony Inlaid Crescent Moon Rosette
~Soundhole consists of Mother-of-Pearl binding
and Ebony inlay
~Solid Sitka Spruce Top
~Solid Rosewood Back
~Herringbone Binding
~Ebony Fingerboard
~Stainless Steel Frets
~1 Piece Mahogany Neck
~Bone Nut & Saddle
~Ebony Bridge
~Gotoh Tuners w/ Ebony Buttons
~B-Band Dual Source Preamp w/ Digital Tuner
~Low Freq Select and Roll Off
~Phase Reverse between elements
~Soun Saddle Transducer Technology
~Mix between Soundboard & Saddle Transducer
~Scale Length: 25
1/2
”
~Nut Width: 1
5/8
”
~Finish: High Gloss
LunaPhoenix
The “Phoenix” features a solid Sitka
Spruce top with exquisite ebony inlay
on soundboard and rosette to form the
mythological bird and crescent moon
design. An Ebony bridge, Ebony
binding, Mahogany sides and solid
Mahogany back complete the immacu-
lately crafted body.
On both The Phoenix and Trinity,
Luna’s Mother of Pearl logo shines
brightly from an Ebony headstock with
Gotoh 18:1 tuners while Luna’s mother
of Pearl signature moon phase fret
markers make their way across an ebony
fret board. Luna’s attention to detail is
further evidenced by a bone nut and
saddle.
Complimenting the design effort is the
inclusion of a state-of-the-art. B-Band
Preamp Tuner that maintains the inti-
mate and natural acoustic tonal quality
of these fine instruments. The Preamp
includes a 3 band EQ , phase select, low
cut filter with frequency select, as well as
Hi and Lo Z outputs.
2
Features
LUN PHX
“Luna Phoenix”
Summary of Contents for Andromeda Electric
Page 1: ......