POLE
LUMINAIRE
10 deg
LUMINAIRE
SET SCREW
PROVIDED
CONNECTOR
!
LUMINAIRE
2
LUMINAIRE
POLE
CONNECTOR
SLOT
HOLES
10 deg
3
1
!
we brighten up your life
LUMZ PTE LTD
INSTALLATION MANUAL
PIXA
INSTALLATION INSTRUCTION
PIXA/INSTALLATION MANUAL/REV.2
2/2
Factory:
No.14, Jalan Anggerik Mokara 31/44, Kota Kemuning Seksyen 31,
40460 Shah Alam, Selangor, Malaysia.
Tel: (00603) 5121 1887
Fax: (00603) 5121 5187
Email: [email protected]
Singapore Office (HQ Sales & Marketing):
1 Coleman Street #10-06, The Adelphi,
179803, Singapore.
Tel: (0065) 9758 2771
Email: [email protected]
www.lumzlighting.com
NOTE:
Connect all wires from the luminaire to AC power using a connector.
Make sure all wiring connections are tight so that no bare wires are visible.Good connections may avoid tripping from happening.
For wiring, use a terminal complies with EN 60998-2-1 and EN 60998-2-2.
Consult your local authority regarding disposal or recycling procedures of removed ballast and lamps.
Read the Installation Manual instruction carefully before install the products to ensure that you obtain the best possible results.
Fix luminaire back to pole adapter by insert
and rotate according to slot on luminaire.
Make sure all screws fix tightly.
Connect wires with connector.
# Make sure power is disconnected before installation
Connect wires with connector.
Fix luminaire
back to pole
adapter with set
screws provided.
Make sure all
screws fix tightly.
# Make sure power is disconnected before
installation
Remove all three set screws
from luminaire for installation.
PIXA.B
OPTIONAL:
Rotate luminaire to change angle of luminaire.
Each holes provide 10 degree of rotation.
PIXA.A
