110
80
100
800
80
8
100
10
64
SCREW
ANCHOR
BOLT
BASE
PLATE
NUT
WASHER
!
1
3
2
CONNECTOR
SCREW
we brighten up your life
LUMZ PTE LTD
INSTALLATION MANUAL
LUCCI BOLLARD
Factory:
No.14, Jalan Anggerik Mokara 31/44, Kota Kemuning Seksyen 31,
40460 Shah Alam, Selangor, Malaysia.
Tel: (00603) 5121 1887
Fax: (00603) 5121 5187
Email: [email protected]
o
o
o
o
o
o
o
Housing made of aluminium
Impact resistance tempered glass lens
Mounting holder with 3 fixing holes
Operating temperature: -20°C~+40°C.
LED lifetime up to 50,000 hours
Voltage range: 100 - 240 VAC ~ 50 /60 Hz
Wattage: 9 W
PRODUCT DESCRIPTION & DIMENSION
IP 65 IK 08 CLASS I WITH INTERGRAL DRIVER
WARNING
!
MAKE SURE POWER IS DISCONNECTED UNTIL INSTALLATION OF PRODUCT IS COMPLETELY FINISHED.
FAILURE TO DO SO COULD RESULT IN ELECTRICAL SHOCK CAUSING SERIOUS INJURY OR DEATH.
BL-16A-J-W9-30-xx
BL-16A-J-W9-40-xx
DESCRIPTION
MODEL:
Connect wires from the luminaire to AC power as follows:
1. Connect BLUE / BLACK wire to the NEUTRAL wire.
2. Connect GREEN / YELLOW-GREEN wire to the GROUND or EARTH wire.
3. Connect BROWN / RED wire to the LIVE wire.
INSTALLATION
!
WIRING INSTALLATION
Note: 2m length cable input provided
Singapore Office (HQ Sales & Marketing):
1 Coleman Street #10-06, The Adelphi,
179803, Singapore.
Tel: (0065) 9758 2771
www.lumzlighting.com
LUCCI BOLLARD/INSTALLATION MANUAL/REV.0
1/2
Connect all wires from the luminaire to AC power using a connector.
Make sure all wiring connections are tight so that no bare wires are visible.
Good connections may avoid tripping from happening.
BL-17A-J-W9-30-xx
BL-17A-J-W9-40-xx
BASE PLATE DIMENSION
Fix luminaire back
to base plate with
screws.
Make sure all
screws fix tightly.
# Recommended
Anchor Bolts:
NOT ≥ Ø8mm
Remove all three
screws from
luminaire to
separate base
plate for
installation.
Connect wires with connector.
# Make sure power is
disconnected before
installation
