L05032 LUMOTECH LED
Thank you for buying this innovative LUMOtech LED PCB. Just connect a driver that supplies 350 or 700mA to
make it work. The LED has a very high light output of 190 Lumen at 700mA for Cool White.
Please read this manual carefully.
HOW TO USE
Handle the LED PCB with care.
! Do not touch the lens of the LED.
Solder two wires to the
+
and
–
pads of the LED PCB.
(Use wires between 0,25mm
2
and 1mm
2
)
Mount the LED PCB to a heatsink of max 10
o
C/Watt.
Only use the two screws and bolds provided. (M3x10.)
! Use thermally conductive paste between the PCB and
the heatsink.
Connect the wires to a driver with an output of 350 or 700mA
!
Check the polarity before plugging in the driver.
Do not look directly into the LED.
!
To ensure maximum lifetime of the LED
always mount the PCB on a heatsink
(max. 10
O
C/Watt). For example:
aluminium plate 70x70x1,5mm.
Always use thermally conducted paste.
!
Make sure that the ambient temperature
does not exceed 45
O
C.
Specifications:
Input Current
350 or 700mA
Power
1.2W - 2.5W
Light output at
350mA
Cool White
Natural White
Warm White
6000
o
K
4000
o
K
2900
o
K
110 lm
90 lm
72 lm
Light output at
700mA
Cool White
Natural White
Warm White
6000
o
K
4000
o
K
2900
o
K
190 lm
150 lm
125 lm
T
case
70
o
C max at PCB
T
ambient
45
o
C max
Anschlüss wires
0,25mm
2
- 1,0mm
2
Weight
2.5 gram
Abmessungen
24,2x20x6,3mm
holes: 3mm, hole to hole 19mm
Approval
CE
Trouble shooting:
Problem
Solution
LED is not working
-Wrong polarity.
-Driver is defective.
-Driver is not suitable.
-Switch the wires.
-Replace the driver.
-Only use a driver that supplies 350 or 700mA.
Warranty: Contact your nearest retailer if service is needed