MT-2142
5
Do not operate the appliance with a damaged or incorrect cord or plug.
This appliance is intended for heating water only. Use of any other liquids or food may damage the interior and void warranty.
Do not allow the cord to hang over the edge of the table or counter, or contact any hot surfaces.
This appliance is designed for household use only! Do not use outdoors.
When not in use and before cleaning, disconnect the appliance from the outlet. Allow the appliance to cool completely before attempting to clean.
Do not operate the appliance without water. If the unit overheats, please allow the unit to cool for at least 15 minutes.
Do not fill above the MAX line; this may cause water to overflow, which may cause scalding.
Steam may damage walls or cabinets, during use place the appliance in open space far from walls; use heat resistive pads under the appliance to prevent damage to wood finishes.
Do not place or use the unit on or near a hot gas or electric burner or in a heated oven.
To remove from the power source, turn the unit OFF and pull the plug from outlet. Never pull by the cord.
To reduce the risk of fire or electrical shock, do not remove the bottom cover.
Do not use for appliance for other than intended use.
Do not wash under direct running water as this will damage the appliance. Clean with a soft moist cloth.
Do no use or store the unit in direct sunlight or near other heat sources (oven, stove, etc.).
The appliance may have difficulty bringing water to boil when used in high altitudes or extreme cold conditions.
Do not disassemble or attempt to repair on your own.
PLEASE SAVE THiS INSTRUCTION!
BEFORE FIRST USE
Remove all packaging materials.
Clean the coffee pot as it said below in “CLEANING AND MAINTENANCE”
Fill the coffee pot to the MAX line and bring to a boil. After boiling pour out the water and repeat the process. This will remove any dust or residue remaining from the manufacturing process.
BOILING WATER
1.
Fill the coffee pot with your desired amount of water, but not less than MIN line. Do not fill above the MAX line.
Do not overfill the appliance!
2.
Connect the cord to power outlet and switch unit ON by pushing ON/OFF switcher; the light indicator lights up.
WARNING
:
The coffee pot will NOT switch off automatically when water has come to a boil. Be careful and do not leave the appliance unattended!
3.
When coffee comes to boil switch the unit OFF.
4.
Push the ON/OFF switcher to turn OFF the coffee pot; the light indicator lights off.
After use, unplug and pour out unused water. Please allow 60 to 90 seconds for appliance to cool down before switching on again. If coffee pot ever boils dry, please wait 15 minutes for unit to cool
before refilling it with cold water. Do
not
turn
on
the
appliance
if
it
is
empty,
otherwise
the
overheat
control
will
engage
and
the
appliance
will
switch
itself
off
automatically. If this happens, after the unit
has cool down, the power will switch on again. To avoid switching on in dry state, turn off the appliance.
Steam escaping from the coffee pot is hot!
CLEANING AND MAINTENANCE
Unplug unit before cleaning and allow unit to cool down.
Wipe the exterior of appliance with a soft cloth. Do not use abrasive scouring pads or cleaning powders as they may scratch the surface.
