Lumme LU-3210, User Manual

Page: 10 / 17

LU-3210
10
USING THE VACUUM CLEANER

Pull out the wire to suitable length; insert the plug into power socket.

Then press the switch to run the machine.

The vacuum cleaner begins to work.

The part, which can adjust wind volume, is on the handle.
ATTENTION: Don't extend the cable beyond the RED mark.
REPLACING THE DUST-CUP

When the dust reach to the 1/4 level in the dust-cup, it means dust-cup is full. At this moment, dust-cup should be emptied and the filter should be washed.

Open the dust-cup as showing in the picture
.
MAINTENANCE:
The filter should often be washed when it is dirty and suggest to be replaced after using 100 hours or so in order to avoid barrier.
When the Plastic-filter is full of dust, it should be washed.
ATTENTION:

Don't wash the filter in the washing machine or dry it with electrical heater, please refix it after drying the filter in the air.

Don't clean the outer-shell of vacuum cleaner in petrol oil-like liquid. Please rub it with water and soft soap liquid.

Don't clean the machine with the cloth full of water. Don't let the water flow into the vacuum cleaner.

Use only as described in manual. Only use manufacturers recommended attachments.