Distributed by
www.HydrotekHydroponics.com
REMOTE DIMMING WITH OPTIONAL DIGITAL CONTROLLER
REMOTE CONTROL FUNCTION
All output specifications are reported as a percentage of the full ballast rating
EXP: 80% of 315W ballast = 252W.
Output Mapping Equation (W): (Dimming ratio )*ballast rating=Output.
Note
：
1.Dimming accuracy is 3% (as per the output power of V
mains
=208V).
2.When the dimming ratio is 0%, the ballast will be off; user can set
the parameters show in the 50%-100%.
It can control remotely
the ballast's on/off/dimming rate.
Group control mode: it
can control the state of a set of products.
Single lamp control mode:
it can control the state of a single product.
Sun rise and set: when the SR/SS set time is 0 min, the ballast will power
on/off as its own speed, actually, it’s exactly same as Power on/off.
If no controller, the ballast can work with full power. If the controller is connected,
it will work at the controller's power.
•
•
•
•
•
Dim signal
Output Power (
W
)