REF. 202094810
1
[ EN ]
INSTRUCTION MANUAL
BISE
GENERAL SAFETY INFORMATION
_____________________________________________________________________________
> Before starting the fan installation, read this manual carefully and
keep it for future reference.
> To reduce the risk of personal injury, attach the fan directly to the
support structure of the house or building and use only the hard-
ware provided in the package.
> Switch off the electricity before installing the fan. Make sure you
have turned off all circuit breakers that power the electrical box
where you are going to install the fan as well as the associated wall
switch.
> All cables and connections must be made in accordance with local
and national electrical rules and regulations. If you are unfamiliar
with how to carry out the electrical installation, you should call in a
qualified electrician.
> To reduce the risk of personal injury/injury, do not bend the blade
clamping system when installing, balancing or cleaning the fan. Nev-
er insert objects between the fan blades when the fan is running.
> To reduce the risk of fire, electric shock or engine damage, do not
lift or carry the fan by holding it by the electrical wires.
> This product must not be installed in contact with water.
IMPORTANT
_____________________________________________________________________________
> Before installing the fan, make sure you have all the pieces and
that no pieces are lost in the foam or packaging.
> Remove the engine from the package. To avoid damage, install
the engine on a smooth surface or use the foam supplied. Do not
leave the fan to one side, it may damage the engine.
> Do not use a power supply that exceeds the voltage range (voltage
230V, frequency 50 Hz).
> This fan is specially designed for installation on the roof.
> Do not install the fan on high temperature objects or damp
rooms. Do not install it in greenhouses, gas pipes
> Do not connect the fan to a regulator. This can damage the engine
of the device.
> On a tile with a flat and firm surface, use the screw accessory kit
that comes with the bombilla.
> Do not install the fan on an instable or inclined ceiling.
Ensure that:
1. The screws are tight
2. Connections are correct. If in doubt, consult a qualified electrician.
3. The connector is well placed. In case of doubt, consult a qualified
technician.
MAINTENANCE
_____________________________________________________________________________
> Due to the natural movement of the fan, some connections may
come loose. Check the bracket screws, hooks and fan blade attach-
ment at least twice a year. Make sure they are tight.
> Clean the fan to help keep it looking new for years to come. Do
not use water for cleaning as it may damage the engine, the wood or
even cause an electric shock.
> Use only a soft cloth when cleaning to avoid scratching the finish.
> No need to lubricate the fan. The engine has permanently lubri-
cated bearings.
¯610mm
150mm
185m
m
60mm
MINIMUM HEIGHT
±260cm
