INSTRUCTION MANUAL
NASIM
REF. 200295201B • 200295210B
[ EN ]
10
GENERAL SAFETY INFORMATION
_____________________________________________________________________________
> Before starting the fan installation, read this manual carefully and
keep it for future reference.
> To reduce the risk of personal injury, attach the fan directly to the
support structure of the house or building and use only the hard-
ware provided in the package.
> Switch off the electricity before installing the fan. Make sure you
have turned off all circuit breakers that power the electrical box
where you are going to install the fan as well as the associated wall
switch.
> All cables and connections must be made in accordance with local
and national electrical rules and regulations. If you are unfamiliar
with how to carry out the electrical installation, you should call in a
qualified electrician.
> To reduce the risk of personal injury/injury, do not bend the blade
clamping system when installing, balancing or cleaning the fan. Nev-
er insert objects between the fan blades when the fan is running.
> To reduce the risk of fire, electric shock or engine damage, do not
lift or carry the fan by holding it by the electrical wires.
> The fan blades must not be lower than 2.3m from the floor.
> This product must not be installed in contact with water.
TECHNICAL FEATURES
_____________________________________________________________________________
1. Class I protection: The material has an earth connection. The
ground wire (green/yellow) must be connected to the clip marked
with the symbol
2. Inverse function
3. Motor: Power: W: 2.5-3-6-11-18-29
RPM: 50-80-110-140-170-200
4. Light: 16W – 4000K LED module.
5. Remote control included.
WARNING
_____________________________________________________________________________
Before starting the fan installation, make sure you have all the parts.
Confirm that there are no missing parts in the foam packaging. Re-
move the motor from its packaging. To avoid damage to the finish,
mount the engine on a soft, cushioned surface or use the foam
provided in the package. Do not place the fan on its side as it may
move the motor and damage the motor.
Ensure that:
1. The screws are tight
2. Connections are correct. If in doubt, consult a qualified electrician.
3. The connector is well placed. In case of doubt, consult a qualified
technician.
The instructions presented in this manual do not cover all situations that may occur.
People who are going to install, maintain and use the fan must take all precautions and precautions and attention needed for the task.
