7
DAISY CHAINING CHAIRS TOGETHER
Step 1: Connect first BOOMCHAIR
®
to any media device using the Direct Connection method as described on page 5.
Step 2: Connect one end of 1/8 in. (3.5mm) AUDIO CORD (2b) into OUTPUT of first BOOMCHAIR
®
.
Step 3: Connect other end of 1/8 in. (3.5mm) AUDIO CORD (2b) into INPUT of second BOOMCHAIR
®
.
Step 4: Repeat steps 2 and 3 starting from second chair to connect more BOOMCHAIRS
®
.
Step 5: Turn all BOOMCHAIRS
®
on by turning POWER SWITCH / VOLUME CONTROL clockwise.
Up to 4 BOOMCHAIRS
®
can be connected when using the direct connection method.
WIRELESS CONNECTION
DIRECT CONNECTION
Step 1: Connect BOOMCHAIR
®
to any media device using the Wireless Method as described on page 6.
Step 2: Repeat Steps 2 through 4 of the Direct Connection method to connect more
BOOMCHAIRS
®
. OR, if using wirelessly, change the
wirelss switcher number of every BOOMCHAIR
®
to the corresponding number of dots on the Transmitter.
Step 3: Turn all BOOMCHAIRS
®
on by turning POWER SWITCH / VOLUME CONTROL clockwise.
Up to 4 BOOMCHAIRS
®
can be connected using the wireless method.
INPUT
OUTPUT
INPUT
OUTPUT
SECOND CHAIR
Connected to First Chair
FIRST CHAIR:
Connected to Media Device
2b
Media Device
TRANSMITTER
TRANSMITTER
Should interference occur, switch the channel on
the WIRELESS TRANSMITTER & DASHBOARD
CONTROL PANEL to a corresponding number of
dots using the top slider bar (Fig. 1). Confirm that
all cables are securely connected.
Make sure 4 AA batteries are correctly installed
in the WIRELESS TRANSMITTER and that the
power is on, as indicated by the LED (Fig. 2).
If you experience static or poor reception from
your wireless connection, you may need to select
the direct connection method to ensure the best
possible sound quality.
WIRELESS CONNECTION TIPS
Fig. 2
Power Switch
Channel
Selector
LED Power
Indicator
Fig. 1
Channel
Selector
Power Port
Audio Port
Battery
Compartment
0 1 2 3
Summary of Contents for boomchair UFO
Page 1: ...OWNER S MANUAL...
