www.Lumishore.com
Lumishore UK Unit 2, Technium 1, Kings Road, Swansea, SA1 8PH, UK | +44(0)208 144 1694 | [email protected]
Lumishore USA 7137 24TH Court East Sarasota, Florida 34243 | (941) 405-3302 | [email protected]
7
Product Support
LED Status
No LED light on driver
Solid LED
Flashing 5 times
Meaning
No power to driver
Power On
Driver cannot detect light
Action to take / Things to check
Check fuse / breaker
Check connections
Check voltage at input to driver connections
Driver is receiving voltage and operating properly
Check the switch is operating correctly
Check power connection to light
Check the connection on the back of the light (if present)
If a light does not switch on, or function normally it should be disconnected from the power source
LUMISHORE Ltd warrants the lighting system to be free from defects in workmanship for a period of three
years, starting from the date of original purchase. Should your lighting system have a problem during this
period, please contact your dealer as soon as you become aware of the defect.
Misuse, abuse, improper installation, neglect, improper shipping, damage caused by disasters (e.g. fire,
flood and lightning), installation by unqualified personnel, unauthorized repair or modification will void
this warranty. For the avoidance of confusion and doubt, non compliance with all installation, maintenance
and operating instructions in this document constitute non conformance with warranty terms.
Full warranty details are available at www.lumishore.com.
TESTING THE LIGHTS
The underwater lighting system should always be tested before the boat goes back in the water. Check that
each light comes on, and all lights change in sequence as per the system operation section above. See the
problem solving guide for advice on resolving any issues.
WARRANTY
TROUBLESHOOTING
In the event of one or more of the lights not lighting up then check the LED status on the driver. The LED
will either be continually ON (healthy), OFF (no power to driver) or flashing. Please refer to the table
below for what the number of flashes means and what action to take..
In the event of an issue then:
1. Check the operation of the light and driver with only that light and driver powered
2. If the light is still not operational then swap the driver with the flashing LED with a driver which is
known to be working and re-test the light
3. Test the driver with a known good light
4. This will determine if the issue is with the light or the driver
5. Record the serial numbers of both the light and the driver and contact your local dealer
