www.Lumishore.com
Lumishore UK Unit 3, Technium 1, Kings Road, Swansea, SA1 8PH, UK | +44(0)208 144 1694 | [email protected]
Lumishore USA 7137 24TH Court East Sarasota, Florida 34234 | (941) 405-3302 | [email protected]
3
Mechanical Installation - 3M Adhesive Strip
Thoroughly clean the mounting surface using IPA, ensure it is dust and dirt free.
Peel back the 3M adhesive backing layer and firmly press strip light in place. Allow the adhesive to set for
24 hours before switching the strip light on.
Outdoor Installation - Mounting Fasteners
For outdoor installation, wet areas or tight bend radii: it is recommended that mechanical fasteners
are used in addition to the adhesive layer.
Using suitable screws the fasteners should be placed every 25 - 30cm apart and/or at either side of
the bend
Mounting Clips (Optional)
For narrow mounting channels Lumishore can supply Stainless Steel metal clips. These are attached
using a countersink screw. Gently prize open the metal clip and insert the strip light. Once in place gently
squeeze the clip together over the strip light.
SQUEEZE TOGETHER WITH
STRIP IN PLACE
PRIZE OPEN TO INSERT STRIP
CTSK SCREW
WITH METAL
CLIP
FASTENING CLIP
