Lumi-Link Command Center - Setup and User Guide
First Time use…
When first installed the system needs to be setup. Setup is a quick and easy process and is only performed upon
initial installation or after a firmware upgrade.
Setup discovers lights that are attached to the network and allows the user to select between a Single Zone or
Multizone mode display.
Underwater lights
can be setup as a “
Single zone”
or as a
“Multizone”
For
Underwater and Above water
installations choose
Multizone Mode
as per the following examples….
Configuration examples…
Exmple 1
; Single Zone –
UW lights Only
Example 2
; Multizone – UW lights, Starboard,
Port, Transom.
Example 3
; Multizone – UW lights &
Lumishore LUX – E.g. downlights, strip
lights and courtesy lights.
www.Lumishore.com
Lumishore UK Unit 3, Technium 1, Kings Road, Swansea, SA1 8PH, UK | +44(0)208 144 1694 | [email protected]
Lumishore USA 7137 24TH Court East Sarasota, Florida 34234 | (941) 405-3302 | [email protected]
1
45-0138 - Rev 1
