REV. 10/12/2015 PN: 110-107
PG:2
2257 route 139
Drummondville, Québec
J2A 2G2
WWW.INNOVAPLAS.COM
H2O WITH CLASSIC 6003
1 year on pool ladder.
1 year on outside ladder.
1 year on hardware.
MANUFACTURER WARRANTY
B
C
D
1)
Insert the four post
covers into their respective
locations on the handrails.
2)
Insert the two handrails
over the two front posts
securing them in place with
the screws provided.
1)
Fill the two bags provided with sand.
2)
Insert the sand bags into the base
before submerging the step.
1)
Slowly submerge the
step into the pool. Make
sure you do not damage
the pool liner in the
process.
x4
Sand
10 lb
Security strap
x2
2)
Once the step is in the pool
secure the platform to the top
seat (see illustration) using
the two straps provided.
wet side
dry side
510-005
Sand
10 lb
115-018
(2 1/2 in.)
x2
OPTIONAL
:
Once the pool step has been
completely assembled and secured
to the pool, attach the two screws
supplied through the platform to the
top seat of your pool to provided a
more rigid assembly.
115-014 (3/4 in.)
E
x2
115-014 (3/4 IN.)
align for 48''
& 52'' pools
align for 54’’
1)
Trace a line on each post at 39 inches from the ground
for 48’’ and 52’’ pools. If you have a 54’’ pool, trace a line
at 40.5 inches from the ground.
2)
Slide the pivot blocks onto the posts and line up with
the traced marks. Do NOT secure yet.
3)
Slide the two posts through the platoform and handrails.
4)
Secure the ladder base to the posts with the screws
provided.
F
1)
Secure the small handrails and platform to the posts
with the screws provided.
2)
Secure the ladder to the
pivot blocks using the
bolts, washers and
nuts provided.
105-012
105-005
x2 x2
125-035
3)
Secure the pivot blocks
(FIRST ASSEMBLED TO
THE LADDER) to the posts
with the screws provided.
Make sure the pivot blocks
are lined up with the marks
traced earlier.
115-014 (3/4 in.)
x16
x2
G
SWING THE LADDER UP AND LOCK IN PLACE
WHEN THE POOL IS NOT IN USE TO PREVENT
DROWNING AND UNAUTHORIZED ENTRY.
WARNING
USE SLIDING LOCK
AS A GUIDE TO DRILL HOLE
IN LADDER IN UP POSITION
USE A 3/8’’ DRILL BIT
**PADLOCK REQUIRED**
