REV. 02/12/2020 PN:
PG:1
2257 route 139
Drummondville, Québec
J2A 2G2
1 year on ladder.
1 year on hardware.
MANUFACTURER WARRANTY
WWW.INNOVAPLAS.COM
CLASSIC LADDER 6007
Tools required
(not included)
Contents of Ladder box SKU # 6007
A weather resistant padlock is
recommended.
MAXIMUM functional
width is 1/4’’.
WARNING
Install the step on a flat surface.
Do not jump or dive from the ladder.
Remove the step from water when temperatures drop below freezing.
In winter, the step should be stored in an area protected from snow.
Never lift the step by its handrails.
Use BATTERY operated tools to avoid electric shock near water.
Ensure no corrosive materials are added to the step or harware kit.
The step must be installed per manufacturer’s instructions.
File off all stripped or sharp edges before assembly to avoid injuries
and liner damage.
The manufacturer is not responsible for damages or injuries caused
by improper installation or use of product.
To ease the installation of handrails and bolts, use a screwdriver to
line up the holes.
x2
x2
Security straps
x2
x2
x2
x2
x2 x2
(3/4 IN.)
x18
2 1/2 IN.)
x2
SCREW BAG 140-0069
(1 IN.)
A
B
C
D
E
B
align for 48''
& 52'' pools
align for 54’’
1)
Trace a line on each post at 39 inches
from the ground for 48’’ and 52’’ pools. If
you have a 54’’ pool, trace a line at 40.5
inches from the ground.
2)
Slide the pivot blocks onto the posts and
line up with the traced marks. Secure with
the screws provided.
1)
Attach the ladder to the pivot
blocks with the bolts, washers
and nuts provided.
2)
Attach the ladder base to the
bottom of the posts with the screws
provided.
3)
Slide the plarform over the
top of the posts. Do not secure
yet. Slide lock over right post.
4)
Insert the post covers
into the handrails. Secure the
two handrails to the posts as
illustrated with the screws
provided.
5)
To complete the assembly,
follow additional instructions
provided with your
compatible step.
x2
x2
x2
x18
C
B
D
E
C
3/8 drill bit
Phillips #2 & #3
B
A
7/16 wrench
Security strap
1)
Secure the platform to the
top seat (see illustration)
using the two straps
provided.
x2
OPTIONAL
:
Attach the two screws supplied
through the platform to the top
seat of your pool to provided a
more rigid assembly.
x2
A
Use sliding lock as a guide to drill hole into
ladder in up position. Use a 3/8’’ drill bit with
a cordless drill.
**PADLOCK REQUIRED**
To find the instructions on how to
install the Classic Ladder with your
pool step, visit our website
http://innovaplas.com/instructions
C
