Modification of product
Any modification of the product by the user is not
recommended and any consequences will not be
covered by Luminiser support services or Luminiser
product warranties.
Safety information
The Luminiser Oil Lantern is designed to hang from
the handle or be placed on a flat and stable
surface. The air outlet on the top must always be
open for the heat to escape and must be at least
25cm below any surface above
.
Operating Instructions using Lamp Oil Unit
1.
Unscrew the Luminiser Oil Unit from the base
of the Luminiser. Inspect for damage. Do not
use any damaged unit.
2.
If there is oil around the wick, it should be
wiped off before the wick is lit. Oil spills will
cause unnecessary smoke until it has
evaporated.
3.
Light the wick on oil unit and wait a second to
ensure stabile flame.
4.
Screw the Luminiser Oil Unit into the base until
you hear a click, which locks it in the right
position.
5.
Depending on the outside temperature, after
30-60 seconds, the Luminiser Lantern is ready
to light up your world.
6.
Select your preferred lighting option by the
switch:
0 = Oil flame light only
1 = front LED
2 = both side LEDs.
7.
To shut down the Luminiser Lantern, simply
blow out the flame through the air outlet in the
top or unscrew the Luminiser Oil Unit from the
base and blow out the flame.
Maintenance of product:
A small layer of soot may build up in the chimney
after regular use. The soot can be easily removed
with a pipe cleaner.
Luminiser Lamp Oil Unit
Luminiser Oil Units are uniquely designed for the
Luminiser Lantern. It contains lamp oil that is odor
minimized and has little health risk when applied
externally. Do not drink or otherwise be ingested.
Warning!
General safety sign. Pay close attention to
the following information regarding the
correct and safe usage of the products.
Be sure to burn out of reach of
children and pets.
Never leave a burning Tea Light
unattended.
Always extinguish the
flame before leaving a room
Avoid direct inhalation of any
smoke.
Do not burn Tea Lights on or near
anything that may catch fire.
Always remember that Luminiser Oil Unit
has is a naked flame. Pay close attention
to the flame to avoid a fire hazard.
Transport cap for Oil reservoir
Replace the cap to avoid oil spills when
transporting.
BEFORE FIRST USE:
READ, UNDERSTAND, AND FOLLOW ALL INSTRUCTIONS AND WARNINGS BEFORE OPERATING THE
LUMINISER. FAILURE TO COMPLY WITH THE PRECAUTIONS AND INSTRUCTIONS PROVIDED CAN
RESULT IN PROPERTY LOSS OR DAMAGE, SERIOUS BODILY INJURY, OR DEATH.
