background image

Please read all instructions prior to installation and keep for future reference!

4.  CEILING MOUNT ONLY
5. TYPE IC
6.  INHERENTLY PROTECTED

Page 4 of 6

7777 N. Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
[email protected]
www.luminii.com

Models TOVE-R-XX

Tove recessed mount

 - 

Installation Instructions

1.  PRODUCT TO BE INSTALLED BY A QUALIFIED 
    ELECTRICIAN.
2.  MORE THAN ONE PERSON IS RECOMMENDED FOR THIS 
    INSTALLATION.
3.  SUITABLE FOR DRY LOCATIONS

10.1

 

Prior to joining the sections together, connect electrical connections together. Join to the corresponding connector with the same colored wires.

10.2

 

Align male section to the female section, if necessary loosen nuts on the bolt brackets. Then insert all brackets into the female section, make sure there 

       is no gap in between sections, followed by tightening the outer bolts on bolt bracket first. Then tighten the 2 other bolts. Refer to bracket detail above, 

       washer must be behind bracket to work properly. Finally tighten the set screws on the plate bracket using the provided Allen wrench.

10.3

 

Secure LED board back into housing and secure the 4 screws back into place. Repeat for all remaining sections.

*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE

10

Bolt Bracket detail

Quick connects

not shown for clarity

LED module

male

female

plate bracket

bolt bracket

alignment

 bracket

set screw

24VDC

bolt

bracket

nut

washer

secure

end bolts

1st

secure

inner bolts

2nd

low

voltage

ground

line

voltage

dimming

10.1

9

screw

LED module

9.1

 Once all sections are installed & set to the proper hanging height from the ceiling. Loosen and remove the 4 screws from the fixture female 

      section LED module & carefully lower 

. Remove from only the sections that will get connected to 

(will be secured in the air, due to the safety wire)

      the fixture male sections.

LED module

9.1

9.1

electrical quick connects

not shown for clarity

fixture 

male section

Joining Continuous Rows together!

fixture 

female section

*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE

10.3

10.1

REV0.2 04132018

Reviews: