*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
Please read all instructions prior to installation and keep for future reference!
4. TYPE IC
5. INHERENTLY PROTECTED
Page 3 of 4
7777 N. Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
[email protected]
www.luminii.com
Models TOVE-G-XX
Tove T-Grid
-
Installation Instructions
A
screw
A.2
A.1
fixture
lens
LED
module
fixture
A.1
Carefully remove the lens from the inside of fixture. By pushing the
provided lens tool to the edge of the fixture. Then slowly pry the lens
down to take out completely.
A.2
Locate the dead module and remove screws. Release the wire clips from
the module, and remove security wire to completely remove the module.
A.3
Snap the new modules clips into the fixture followed by tightening screws
on the sides.
lens
tool
mount
access module
6.1
B
B .1
Re-connect all quick connects for module.
B .2
Push all the wires & connectors into the housing and then align the LED
module into the housing and secure using the provided screws.
B .3
Snap lens back into the housing.
B .1
quick
connect
6.1
B .2
Replacing LED Module
1. PRODUCT TO BE INSTALLED BY A QUALIFIED
ELECTRICIAN.
2. MORE THAN ONE PERSON IS RECOMMENDED FOR THIS
INSTALLATION.
3. SUITABLE FOR DRY LOCATIONS
REV0.2 04132018
