*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
NOTE:
When laying out the t-grid configuration on the ceiling, each
fixture requires 4-3/8" x length for the fixture to fit properly.
1
tile
width
4-3/8"
grid width for fixture
fixture
length
tile
width
4-3/8"
t-grid
1.1
Please read all instructions prior to installation and keep for future reference!
1. PRODUCT TO BE INSTALLED BY A QUALIFIED
ELECTRICIAN.
2. MORE THAN ONE PERSON IS RECOMMENDED FOR THIS
INSTALLATION.
3. SUITABLE FOR DRY LOCATIONS
4. TYPE IC
5. INHERENTLY PROTECTED
Page 1 of 4
7777 N. Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
[email protected]
www.luminii.com
Models TOVE-G-XX
Tove T-Grid
-
Installation Instructions
2
2.1
Install hanger wire (not provided) to
the fixture. Carefully bring the fixture to the
back of the t-grid area, followed by placing
the fixture on the t-grid. Additional
information below.
2.1
t-grid
fixture
suspension
cable
4
suspension cable
4.1
Use page 4 wiring diagram as reference, and make all the nessary wiring.
fixture 1
power
j-box
joining
j-box
fixture 2
conduit
T-grid
4.1
3
CAUTION:
Make sure the hanger wire is secure to each endcap. Make sure to tie the end of the wire back through the first loop, bend the end of the wire up
to prevent the wire from untwisting.
(2X) Ø 0.20 hole
Ø 0.15 hole
#12 guage wire hanger
T-grid
endcap
REV0.2 04132018
