REV0.2
RPLW80 Channel -
Installation Instructions
Please read all instructions prior to installation and keep for future reference!
1. Product should be installed by a qualified electrician.
2. Prior to installation ensure power is off at fuse box to prevent electrical shock.
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATIONS & INSTRUCTIONS WITHOUT NOTICE
7777 Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
[email protected]
www.luminii.com
Page 2 of 2
9
Ensure power is off to power supply!
Then proceed to connect LineLED wires from RPLW80
extrusion to power supply. Connection can be established
with lead wires or quick-connect powerfeed. For more
information please refer to power supply and LineLED
wiring instructions.
power to LineLED of
RPLW80 extrusion
class II
power
supply
line voltage wires
8
After fixture has been properly installed, peel and remove
protective film from the front of the lens.
low voltage wires
protective
film
7
Install endcaps at both ends of extrusion with provided
screws. Then attach RPLW80 extrusion to the blocking with
flathead, Nº 4, 1/2” long screws. Lastly, after the extrusion
is in place simply snap on the lens.
blocking
endcap
lens
wires to
power supply
