luminii Kurba Pixel KBL-F-V-SPI, Installation Instructions Manual

Page: 2 / 6

Installation Instructions - Kurba Pixel
Models KBL-F-V-SPI and KBM-F-V-SPI
Please read all instructions prior to installation and keep for future reference!
1.
PRODUCT TO BE INSTALLED BY A QUALIFIED ELECTRICIAN.
2.
USE ONLY WITH CLASS 2 POWER UNIT
3.
24 VOLTS DC
4.
SUITABLE FOR WET LOCATIONS
5.
SURFACE MOUNT ONLY
7777 Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
info@luminii.com
www.luminii.com
REV0.4
08012022
2
/
6
Kurba Horizontal
(KBM-XX)
Kurba Vertical
(KBL-XX)
CAUTION: Reference diagram below on Can and Can-nots, when it comes to installing the Kurba
Horizontal & Vertical!
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
Bend in this direction only Bend in this direction only
Twisting Kurba will cause damage
to the LED
Twisting Kurba will cause damage
to the LED
Bending in the same direction
as the LED will cause damage
to the LED
Bending in the same direction
as the LED will cause damage
to the LED
CAN CAN
CANNOT CANNOT
Bend LED in these positions to avoid damage Bend LED in these positions to avoid damage
Twisting or bending LED in these positions will
cause damage to the LED
Twisting or bending LED in these positions will
cause damage to the LED
LED surface
(gray color)
LED surface
(gray color)
LED surface
(gray color)
LED surface
(gray color)
Do not make sharp bends
near the endcap
Do not make sharp bends
near the endcap
2.5” radius
minimum
LED surface
(gray color)
LED surface
(gray color)
2.5” radius
minimum