ϯ
&/Z^dE'>WZK:d/KE
>ƵŵŝŽƌĞ
^>͗ϭ͗Ϯ
ƵŶŝƚƐ͗ŵŵŝŶĐŚ
$
$
%
%
&
&
'
'
(
(
)
)
>hϬϭϬϬϬϳϰ
a
b
^>͗ϭ͗ϮƵŶŝƚƐ͗ŵŵŝŶĐŚ
$
$
%
%
&
&
'
'
(
(
)
)
*
*
+
+
>ƵŵŝŽƌĞ
&/Z^dE'>WZK:d/KE
Ϯ
>hϬϭϬϬϬϳϰ
D
e
e
C
2.1 mounting the device
LumiCore is a device that can be mounted in a truss as well as in a rack. Please read the following
instructions to make sure the device is mounted and secured correctly.
RACK MOUNT
In case you want to mount your LumiCore in a standard 19-inch rack, you must attach the included
mounting ears. Connect the longest ear
(A)
to the right-hand side of the device with 4 screws, re-used from
the device. Attach the shorter ear
(B)
to the left-hand side again with the 4 screws.
RACK MOUNT - TWO DEVICES
In case you want to mount two LumiCore devices or a LumiCore and a LumiCore4 in a standard 19-inch
rack you can mount the two devices together. A space saving way as the two devices will only consume a
single row in your 19-inch rack.
First you attach the shortest mounting ears. Connect the shortest ear
(C)
to the left-hand side of the first
device with 4 screws, re-used from the device. Attach the other shortest ear
(D)
, delivered with the second
device, to the right-hand side of the second device, again with 4 screws. Use a pair of mounting brackets
(E)
to connect the two devices in the middle at the front. Use a second pair of mounting brackets
(E)
, delivered
with the second device, to connect the devices at the rear. Each pair of brackets musts be mounted with 2
screws.
7
2. Installation
2. Installation
