11
Connection to the web interface
■
Connect a computer to the switch.
■
Set an IP address in the same range as the switch IP address.
■
Default GigaCore IP address is displayed at the rear of the unit. Set your computer with a compliant IP address (do not
use the same IP address ! ). IP address is also available on the front display.
■
Launch your favorite web browser.
■
Type the IP address of the switch in the address field.
■
Enter admin in the login field. Leave the password field blank.
Additional documentation
All additional documenttion can be downloaded from our web pages in the support section :
http://www.luminex.be
--> Support
Specifications
Luminex LCE operates a policy of continuous development. Luminex LCE reserves the right to make changes and
improvements to any of the products described in this document above without prior notice. Specifications are subject
to change without notice.
Connect the power cable to the device, and connect the other side of the cable to the mains. It will take around 20
seconds for the switch to boot up. Your GigaCore 16RFO is now ready to use.
Power Input
Physical
Power Input
100-240VAC - 50/60Hz
0.3A - 0.125A
1.8A - 0.75A with PoE Option
Enclosure
Metal Housing
Dimensions (W x D x H)
482 x 294.15 x 48.45 mm
19” x 11.58” x 3.48”
Backup Power Input
100-240VAC - 50/60Hz
0.3A - 0.125A
1.8A - 0.75A with PoE Option
Packaging
510 x 410 x 136 mm
20.07” x 16.14” x 5.35”
Weight
4.9Kg
Fuse
3.15A 250V Slow Blow
Approvals
Environmental
CE
P
Operating Temperature
0 to + 50°C
EN 55103-1
P
Storage temperature
-10 to +70°C
EN 55103-2
P
Humidity
5 to 95 % RH
EN 60950-1
P
RoHS Compliance
P
