Page 4
For technical questions, please call 1-888-866-5797.
Item 56267
User Servicing Instructions
Read the ENTIRE IMPORTANT SAFETY INSTRUCTIONS section at the
beginning of this document including all text under subheadings therein
before set up or use of this product.
Lamp Replacement
WARNING!
REPLACE LAMPS ONLY WITH 12 VOLT, 0.96
WATT SPARE LAMPS PROVIDED WITH THIS PRODUCT. LIGHTING
STRING IS RATED 9.6 W (0.08 A) – DO NOT OVERLOAD. CONNECT OTHER
LIGHTING STRINGS OR DECORATIVE OUTFITS END-TO-END UP TO A
MAXIMUM OF 216 W (1.8 A) TOTAL. DO NOT TEST LIGHT SET WHILE IN
PACKAGING. THIS MAY BUILD UP EXCESS HEAT WHICH CAN CAUSE
A MELTDOWN OF THE PACKAGING MATERIAL AND CAUSE A FIRE.
1. Grasp plug and remove from the
receptacle or other outlet device.
Do not unplug by pulling on cord.
2. Remove the lampholder
from the decorative cover by
pulling it out of the cover.
3. Pull bulb and lamp base
straight out of lampholder.
4. Replace lamp with only 12 volt,
0.96 watt, regular brightness
lamp (provided with product).
5. Insert the lampholder back
into the decorative cover.
CAUTION!
To reduce the risk of overheating
replace burned out lamps promptly.
Figure A below illustrates how to exchange
the lamp base on the new lamp with the
old one if the new lamp base does not fit.
Remove bulb
and base
from socket.
Push new
bulb and
base into
socket.
Straighten
bulb wires
–
remove bulb
from base.
Insert wires on new bulb
into holes in base. Bend
wires up and to the sides.
Bulb
Bulb
Bulb
Wire
Bulb
Wire
Bulb
Wire
Base
Base
Base
Socket
1
2
3
4
Bulb
Base
Socket
Figure A: Replacing Bulb in Lamp Base
