U.L. Model No.: SW93/SW95/SW96
10
5. Wall Control Operation
NOTE: Fan control knob turns fan on at maximum
speed to assist motor start-up. Fan speed
decreases with clockwise rotation.
5.1
Set the Fan(s) on their HIGH Speed Pull Chain
Settings. Then use your Wall Control to select any
of the Speeds, plus OFF (Figure 14).
NOTE: Fully counter-clockwise is OFF. The three
or four fan speeds are selected by rotating the
knob one position at a time clockwise.
Figure 14
For fans equipped with built-in variable
speed devices: These devices must be set at
their MAXIMUM SPEED for proper operation.
Adjustments to their setting must only be
made with this fan control in the OFF position.
Changing or switching these settings while the
fan control is in operation could damage the
control.
CAUTION
!
1st Pull - HIGH
2nd Pull - Medium
3rd Pull - Low
4th Pull - OFF
CHAIN COUPLER
3-SPEED SWITCH
PULL CHAIN
WALL
CONTROL
5.2:
(Figure 15)
IMPORTANT
Always have the fan switch set to HIGH speed
before using the wall control. To avoid accidental
pull chain use, shorten chain by cutting it 1-inch
below switch body.
Figure 15
CHAIN COUPLER
SHORTENED
3-SPEED SWITCH
PULL CHAIN
