background image

18

  

 U.L. Model No.: CF905-1

This product is designed to use only those parts 

supplied with this product and/or any accessories 

designated specifically for use with this product 

by Luminance Brands. Substitution of parts or 

accessories not designated for use with this product 

by Luminance Brands could result in personal injury 

or property damage.

 

WARNING

!

See your local Luminance Brands dealer, 

www .luminancebrands .com or our catalog for these 

accessories:

·

  Ceiling Fan Controls

·

  Ceiling Fan Light Kits

12. Accessories

The use of any other control not specifically approved 

for this fan could result in fire, shock and personal 

injury.

 

WARNING

!

Do not use water when cleaning your ceiling fan. 

It could damage the motor or the blades and create the 

possibility of an electrical shock.

 

WARNING

!

IMPORTANT CARE INSTRUCTIONS 

for your Ceiling Fan

Periodic cleaning of your new Ceiling Fan is the only 

maintenance that is needed .
When cleaning, use only a soft brush or lint free cloth to 

avoid scratching the finish .
Abrasive cleaning agents are not required and should 

be avoided to prevent damage to finish .

11. Maintenance

Summary of Contents for Kathy Ireland Home Prima Snugger CF905BS01





















Reviews: