Luminance Brands CF590GRT00, Owner'S Manual

Page: 14 / 104

6. Optional Installation of No-Light Plate Assembly
(Continued)
14
ETL Model No.: CF590
6.4
Place the No-Light Plate into the opening of the Light Kit
Adapter, aligning the three Flat Areas on the top edge of
the No-Light Plate with the three Raised Dimples on the
Light Kit Adapter and turn the Plate clockwise until it
stops (Figure 23).
NOTE: The no-light plate is equipped with an
interference device that will not allow it to be
installed if the light kit assembly is not removed.
NOTE: Periodically check that the no-light plate is
seated fully clockwise in the Light Kit Adapter.
H
LIGHT KIT
ADAPTER
RAISED
DIMPLES (3)
FLAT AREA OF
NO-LIGHT PLATE
NO-LIGHT PLATE
ROTATE
CLOCKWISE
INTERFERENCE
DEVICE
Figure 23