02100004 Rev 1
CCPF-3500-XX User Manual
Page 5 of 15
3.
CCPF-3500/4000-XX Specifications
XX indicates output voltage with P for positive and N for negative.
Input
Voltage
200 - 240 VAC, single phase
Current
22 A maximum at 200 VAC and 18.4A maximum at 240 VAC
Frequency
47 - 64Hz
Output
Power:
3500 J/s average charge rate for full discharge PFN
4000 J/s maximum charge rate for reservoir charging
See section 5 Typical Applications below
Output Voltage
Fixed voltage between the ranges of 400VDC – 4.0kVDC
(factory configured, contact factory for voltages > 4kVDC)
Polarity
Positive or Negative (factory configured)
Efficiency
>80% at full output
Regulation:
0.5% @100Hz
Aux. Output
+24VDC @ 3A (optional feature)
Interface
Connector
15 Pin “D” Sub Female
Voltage Program
0-10V for 0-Max Voltage
Voltage Monitor
0-10V for 0-Max Voltage
Inhibit/Reset
Input, low level (high level optional, contact factory)
End of Charge
Output indication
Overvoltage
Output indication
Overtemp
Output indication
Overload
Output indication
+15V Aux Power
Environment
Operating Temp
0 to 40
o
C
Storage
-20 to 85
o
C
Humidity
0 to 90% non-condensing
Cooling
Forced air
Altitude and Pressure
2000 meters maximum, 80 to 103 kPa
Dimensions
Please see Figure 3, CCPF-3500 Mechanical Outline Drawing
Outline
14.2 inch length, 5.5 inch wide, 6.0 inch high
(does not include mounting flanges or electrical terminals)
