11
Step 10
Install the 8 enclosure torx screws.
Connecting the BOTW P&P ECO 12-13V MKII to the Lumïn Bracket
Both the Lumïn bracket and the Female DC connector are carrying our “S” logo. When both logos are facing to
the same side, the connector pins are at the right spot and the Female DC connector can be inserted.
Tight fit Female DC connector
In some cases the Female DC connector has a very tight fit to the Lumïn bracket. The fitting can be improved by
using a stock supplied DC plug first and insert and release the DC plug 5 – 10 in the Female DC connector.
Always use the On/Off switch if you want to turn “Off” the BOTW P&P ECO MKII. Turn the BOTW P&P ECO MKII
always first “Off” before you pull the mains plug out of the AC outlet. This prevents the chance of getting an
electric shock from the mains plug.
When the BOTW P&P ECO MKII has been switched "Off", wait until the green led is fully off and wait
approximately an additional 30 seconds before you turn the power supply back on.Set Sbooster BOTW P&P
ECO 12-13V MKII PSU to
12V
, turn the BOTW “ON” and enjoy your music!
Lumïn bracket Female DC connector DC plug
