Lumie GO 75, User Manual, Page: 4 / 88

4 English
Getting started
Here's how to set up your Bodyclock Go for the first time.
The bulb is supplied packed in a separate box and needs to be fitted into the
Bodyclock Go before use.
to remove the lamp cover
The lamp cover is attached to the base of the Bodyclock Go by two internal
clips, one at either end of the cover:
Clip
Squeeze here
Squeeze here
Clip
Squeeze gently near the middle of the lamp cover to release the clips.
Remove the lamp cover.
to fit the bulb
Screw the bulb into the holder.
Replace the lamp cover by pressing it down until the clips at each end pop
into place.
to position Bodyclock Go
Decide where to put your Bodyclock Go.
The ideal place is on a bedside table near the head of your bed, near a mains
socket.
•
•
•
•
•
Getting started