9
Setting the wake-up speed
¾
The wake-up sequence is pre-set so the sunrise starts 30 minutes
before wake-up time.
¾
To change the speed of the wake-up sequence…
¾
Make sure
A
is OFF (button depressed).
¾
Press
P
repeatedly until
FADE UP 30
(or
60
or
90
or
15
or
DEMO
) appears on the display.
¾
Immediately press
+
or
–
until the desired wake-up speed appears.
¾
Press
P
to move on to the next setting or wait 12 seconds for the
clock to revert to normal.
¾
Remember to press
A
again so that the wake-up is ON (button
elevated).
10
Using snooze
¾
When the beeper sounds, press
–
once to turn it off and leave the
light on.The beeper will sound again 9 minutes later.
¾
If you prefer, when the beeper sounds press and hold
–
to turn off
the beeper and dim the light.The light will re-illuminate to full
strength over the next 9 minutes then the beeper will sound again.
11
Disabling the back-up beeper
¾
To turn the beeper off at wake-up time when it is sounding, press
A
.
¾
The beeper is pre-set to ON, to change this…
¾
A
must be OFF (button depressed).
¾
Press
P
repeatedly until the program message reads
BEEP ON
.
¾
Immediately press
+
or
–
until you see
BEEP OFF
.
¾
Press
P
to move on to the next setting or wait 12 seconds for the
clock to revert to normal.
¾
The beeper symbol is displayed when the beeper is on.
www.lumie.com
|
lumie careline 0845 658 9292
|
7
English
BCAI0708 14/8/07 18:25 Page 7
