REMEMBER
- Nothing replaces parental supervision.
Watch children at all times.
Fig. 8
ballast
Fig. 7
Rev. 2008-10-24
p.2
7.
If the pool is lower than the deck, the
braces should be shimmed* to attain the
same level as the deck (fig. 7). Ensure the
shim is properly secured to the top rail.
8.
Place the second ballast on the top step.
Step Maintenance
1 - When adding water in your pool, insert the nozzle of your
hose in the side holes of the step to allow a good water
circulation throughout the season.
2 - When treating your water do not forget to treat the water
inside your step.
CAUTION
:: Install the step on a solid base and flat base.
:: Do not jump or dive from the step.
:: The step should be removed from the water when
temperature drop below freezing.
:: Never lift the step by its rail.
:: Use battery-operated tools to avoid electric shock near water
:: Ensure no corrosive materials are added to the step or hardware kit
:: The step shall be installed per manufacturer’s instructions.
:: File off all stripped or sharp edges of hardware to avoid injury.
:: The manufacturer is not responsible for damage or injuries
caused by improper installation or use.
:: For more protection, we suggest to install a step pad* under
the step.
STEP 7
STEP 8
Lumi-O International Inc. Saint-Jérôme, Québec, Canada
J7Y 4E5
www.lumi-o.com
This model require a maximum inclination of
the bottom of the swimming pool of
approximately 2 degrees.
* Not included with the step