background image

7

565DG/565TG Ortho-Biotic Preferred Care

®

Recliners Operating Instructions

Frame

Key Ring

Strap

Hook

Figure 11

Figure 10

Figure 12

565G UPHOLSTERY REMOVAL AND

REPLACEMENT

BACK CUSHION
To remove:

Release the two elastic straps which

hold the button of the cushion to the back frame

with small wire clips (See fig. 10).

Grip top of cushion near back frame handgrips

and slide up and off.

To replace:

Reverse procedure.

SEAT-LEG CUSHION
To remove:

Release the two elastic straps which

hold the cushion to the back frame with small

wire rings (See fig. 11).

Adjust the chair into the semi-recline position.

Flip the seat cushion forward and release the

two hooks which hold the cushion to legrest

frame (See fig. 12).

Slide the cushion downward and forward.

To replace:

Reverse procedure.

ARM PANELS
To remove:

Grip the steel rod at the bottom of

the side panel, located near the front of the side

frame. Gently slide the rod backward. Flex the

rod slightly until it disengages (See fig. 12).

Detach the four screws from under the side

frame arm plate.

To replace:

Reverse procedure.

Summary of Contents for Lumex Preferred Care 565DG












Reviews: