LF1600-INS-LAB-RevE15 • LF1600 Stand Assist
12
7 MAINTENANCE
To ensure safety and proper use, perform the following steps monthly:
• Check all fasteners to ensure that they are securely fastened and no wear and tear
is evident. Replace and tighten any worn fasteners before using the Stand Assist.
• Check the two seat assemblies to make sure they are not worn or damaged, and
that the bolts are tight. Replace any worn or damaged seat components before
using the Stand Assist.
• Check the casters to make sure they are in working order and are secured firmly
to the Stand Assist. Replace any worn or damaged casters before using the
Stand Assist.
If any maintenance procedure is not clear to you, ask your GF authorized distributor
for assistance.
s
NOTICE: Improper maintenance can cause operating problems and may
affect your warranty.
WARNING: Unauthorized modification or the use of non-Lumex
replacement parts could change the structure of the Stand Assist, void
the warranty, and create a hazardous condition resulting in serious
personal injury.
CLEANING THE STAND ASSIST
• Wipe off the frame at least once a week with a soft cloth. Dry the Stand Assist
immediately if exposed to moisture.
• Clean the frame every three months with a mild soap and water solution. The
frame does not need to be waxed.
• Clean upholstery and plastic components at least once a month with a mild soap
and water solution.
s
NOTICE: Do not use solvents, abrasive waxes, caustic chemicals or spray
silicone to clean the Stand Assist.
s
NOTICE: Do not use abrasive cleansers to clean the Stand Assist; they
could scratch the finish.
s
NOTICE: Do not use steam or high pressure cleaners to clean the
Stand Assist.
Summary of Contents for LF1600
Page 16: ... Made in Taiwan ...
